FLYER-R410A
Precautions for using R410A in air conditioner
R410A is currently the commonly used refrigerant in household air
conditioners and central air conditioners.It has the advantages of high heat
transfer efficiency and good cooling and heating effect.It is also the most we
Jingyuan Hongtai sell to the air conditioner factory.However,its requirements
are higher,mainly because of the following six aspects.
1.R410A copper pipe must use special copper pipe refrigeration fittings with high pressure resistance coefficient.Also
must choose R410A special accessories,avoid using ordinary R22 air conditioning copper pipe instead of R410A copper
pipe.
2.R410A refrigerant split air conditioning unit should not be confused with the piping and refrigerant used in R22 air
conditioning during installation.
3.R410A split air conditioners have higher installation requirements,the system must be fully evacuated,and sweat or
other insoluble materials should not be dripped into the pipeline.The best choice is to install in fine weather.
4.When the R410A central air conditioning unit is being repaired,if the Freon system needs to be cut,the dry filter should
be replaced before re-welding.
5.The air conditioning unit should be re-vacued with special vacuum pump after repair.And the vacuum should reach
100PSI.
6.R410A must be stored in an environment below 30CIf it is necessary to add refrigerant in an environment above 30C,
the refrigerant should be placed in a cool environment for more than 24 hours in advance.
Quzhou Jinyuan Hongtai Refrigerant Co.Ltd.
